Genelec 8341A SAM Studiomonitori musta

Genelec 8341A SAM™ Studio Monitor Black

High headroom three-way with unbelievable imaging. The 8341A is the point source monitor with the perfect blend of size and performance.

Work faster, for longer

For applications calling for extraordinary imaging, extended frequency response, short to medium listening distance or long, fatigue-free working hours, The Ones are in an elite league of their own. They promote faster and more consistent decision making, and they also extend listening time, because unnatural imaging - a main contributor to listener fatigue - is minimised.

Mixes that translate

As bigger brother to the super-compact 8331A, the 8341A offers increased LF extension and a higher SPL capability, so is ideally suited to slightly longer listening distances. In conjunction with our GLM calibration software, the 8341A will also compensate for detrimental room acoustics and distance delay, regardless of whether you work in mono, stereo or immersive formats. So now you can deliver mixes that translate beautifully - every time.

Technical Specifications

System Specifications

Frequency Response

45 Hz - 20 kHz (± 1.5 dB)

Low cutoff -6dB
38 Hz

High cutoff -6dB
37 kHz

SPL

Peak SPL
≥118 dB

Maximum peak acoustic output per pair in a listening room with music material at 1 m.

Short term max SPL
≥110 dB

Maximum short term sine wave acoustic output on axis in half space, averaged from 100 Hz to 3 kHz at 1 m.

Long term max SPL
≥101 dB

Maximum long term RMS acoustic output in the same conditions with IEC weighted noise (limited by driver protection circuit) at 1 m.

Self-generated noise

Self-generated noise
≤3 dB

Self generated noise level in free space at 1 m on axis (A-weighted).

Weight

Weight
9.8 kg (21.6 lb)

Dimensions

Height
351 mm (13 13/16 in)

Height with Iso-Pod
370 mm (14 9/16 in)

Width
237 mm (9 11/32 in)

Depth
243 mm (9 9/16 in)

Enclosure

Enclosure material
Die cast aluminium

Enclosure type
Reflex port

Drivers

Bass

Driver type
Racetrack

8341A bass driver

Count
2

Width
170 mm (6 11/16 in)

Height
90 mm (3 17/32 in)

Midrange

Driver type
Coaxial

8341A midrange driver cone (coaxial)

Diameter
90 mm (3 17/32 in)

Treble

Driver type
Coaxial

8341A treble driver metal dome (coaxial)

Diameter
19 mm (3/4 in)

Directivity

Vertical directivity

Horizontal directivity

Harmonic distortion

50…100 Hz ≤2 %
> 100 Hz ≤0.5 %

Group delay

The latency at high frequencies from the input to the acoustic output, measured in the analog input:

Extended Phase Linearity in GLM set to OFF (top graph)
3.3 ms

Extended Phase Linearity in GLM set to ON (bottom graph)
7.0 ms

In Genelec performance graphics, the time of converting the from an electronic input signal to the acoustic output in a Genelec monitor is described by two factors – latency and group delay. The group delay factor can be read in the graphics for a specific frequency. The total frequency-specific input-to-output delay is a sum of the latency and group delay factors. To understand the significance of this total delay, consider that moving a loudspeaker away by 1 meter creates an additional delay of about 3 ms.